Valuable Information

as you begin the Lean transformation

Our Blog

IMPROVE PHASE

By Drive, Inc. on Saturday 14 November 2009.

Last month, we focused on the “A” in the DMAIC cycle for Six Sigma. We discussed the processes and tools used to ANALYZE the output performance of the process. This month, we will focus on the “I” in the DMAIC cycle, which is the IMPROVE phase. In this phase, we should now be ready to develop, implement, and evaluate solutions targeted at our VERIFIED cause. The goal is to demonstrate, with data, that our solutions solve the problem and lead to an improvement. We must VERIFY the effectiveness of the solution. Failing to VERIFY the effectiveness will lead to false hope and busy work trying to maintain the improvement.

CONTROL PHASE

By Drive, Inc. on Thursday 15 October 2009.

Last month, we focused on the “I” in the DMAIC cycle for Six Sigma. We discussed the processes and tools used to IMPROVE the output performance of the process. In this issue, we will focus on the “C” in the DMAIC cycle, which is the CONTROL phase. In this phase our goal is to ensure the problem stays fixed and make certain that the new methods can be further improved over time. Have you ever ‘fixed’ a problem only to see it surface again just a few months later? We observe that the lack of sustainment of improvements (including the lack of permanent corrective actions to problems) is the number one inhibitor to DMAIC success.

Hands-on Six Sigma

By Drive, Inc. on Tuesday 15 September 2009.

The following is an actual example of how LMSPI applied “Hands-On” Six Sigma to help a customer solve a problem that had crippled them since a product’s inception. The client is a US manufacturer of custom thermoplastic profile extrusion that engaged LMSPI to apply our brand of Six Sigma.

LEVERAGE SIX SIGMA

By Drive, Inc. on Saturday 15 August 2009.

Together, we have taken a dive into each step of the DMAIC Cycle for Six Sigma in order to address the value and form, fit and application in your environment. In the last publication, we focused on the “C” in the DMAIC Cycle. We discussed the processes and tools used to CONTROL the new process. In this issue, we will focus on the value of LEVERAGING our success. When LEVERAGING our improvements, we should consider many different aspects of the business. Don’t limit yourself to just your area. Below is a list of most commonly seen areas that may benefit from LEVERAGE: 1. Material Lots 6. Products 2. Part Types 7. Departments 3. Areas within a Department 8. Product Families 4. Machines 9. Divisions 5. Processes 10. Regions 11. Plants

ANALYZE PHASE

By Drive, Inc. on Wednesday 15 July 2009.

In the previous issue in this series, we focused on the “M” in the DMAIC cycle for Six Sigma. We discussed the processes and tools used to MEAURE the output performance of the process. This month, we will focus on the “A” in the DMAIC cycle, which is the ANALYZE phase. In this phase, we will develop theories of root causes, confirm the theories with data, and finally identify the true root cause(s) of the problem. The true root cause(s) will form the basis for solutions in the next phase of the DMAIC cycle, which is the IMPROVE phase covered in our next newsletter.

Showing 1 - 5 of 5 Articles
< Previous 1 Next >

Looking for More?

Archives: