Valuable Information

as you begin the Lean transformation

Our Blog


By Drive, Inc. on Tuesday 15 September 2009.

Last issue, we focused on the “D” in the DMAIC cycle for Six Sigma. We discussed the processes and tools used to DEFINE the project. This month, we will focus on the “M” in the DMAIC cycle, which is the MEASURE phase. In this phase, we discuss the process and tools used to pin point the location or source of deviation. By doing this, we will build a factual understanding of the existing process condition and problems. The knowledge gained in this phase will help the team narrow a range of potential causes that need to be investigated in the ANALYZE phase, which we will cover in next month’s newsletter. Although the intent of this newsletter is not to completely teach you how to perform the MEASURE phase, it can get you started in the right direction. As you know, the complete process of Six Sigma is very data intensive; therefore, this newsletter series on Six Sigma creates a guided introduction and does not cover the topic entirely.


By Drive, Inc. on Saturday 15 August 2009.

In the last newsletter we discussed the phases of Six Sigma. There are 5 phases in the Six Sigma problem solving process. Each phase is very important to the overall success of the project. This month we will dive into the first phase of the Six Sigma process, which is called the DEFINE phase.

Six Sigma Basics

By Drive, Inc. on Wednesday 15 July 2009.

Six-Sigma is a problem solving methodology that synergizes well with any Lean enterprise initiative. In some companies, the term “Lean Six Sigma” is used instead of separating the two methodologies, since they complement each other in their objectives. Lean is a system to eliminate waste, unevenness and overburden by identifying and solving problems utilizing people. Six-Sigma can be the methodology that is used to identify key problems, validate root cause, and solve the problem properly and permanently using statistical tools.

Showing 111 - 113 of 113 Articles

Looking for More?